Mitchell Ez-Kleen™ Crete Pewter Vinyl Fabric

Mitchell Ez-Kleen™ Crete Pewter Vinyl Fabric

$26.80 per Yard

On Back Order until Mid April

Quantity (Yards):


  • Product ID: CREPEW
  • Manufacturer: Mitchell
  • Content: 100% Polyvinyl Chloride, 100% Polyester Backing
  • Width: 54"
  • Durability: 100,000 Double Rubs
  • Finish: Ez-Kleen Stain-Resistant Protection
  • Fire Rating: California Technical Bulletin #117-2013, Section 1; UFAC Class I; NFPA 260
  • Color Fastness: 250 Hours, Grade 4-5
  • Seam Strength: Meets or Exceeds ASTM D 751-06
  • Tear Strength: Meets or Exceeds ASTM D 751-06
  • Tensile Strength: Meets or Exceeds ASTM D 751-06
  • WARNING: View Prop. 65 info
  • Common Uses: Contract, Healthcare, Hospitality, Residential
  • Care: Clean regularly with mild soap and water. Wipe up spills as soon as they occur. Remove difficult stains with a solvent type cleaner, such as rubbing alcohol. Disinfect using a 10:1 ratio of water to bleach solution. Thoroughly rinse all cleaning solution residue with water. Dry with a soft, lint-free cloth.
  • Maximum Continuous Length: Approximately 30 Yards When ordering more than 30 yards it may come in more than one piece.

Crete reminds us of a woven textile, with a slightly nubby texture and a lovely two-tone effect that creates a casual, comfy look. It has the Ez-Kleen™ stain-resistant protective finish and an abrasion resistant rating of 100,000 cycles. The Ez-Kleen™ faux leathers are made from polyvinyl chloride (PVC). These vinyl products are non-porous and highly cleanable. They are durable and resistant to abrasion.

Q & A